R41 Pendant / Earring Case
Part of the Manhattan Collection, Classic Design:
Internal Dimension (in mm): 78 x 71 x 34
Pendant or Earring Case with inner lift out pad for use as pendant pad or flap earring pad
This jewel box is shown with the following options:
A) Outside Cover Material: Blue Skiverlite SE205
B/D) Tooling Top and Inside Rims: none
C) Tooling Outside Lid and Base side Tooling: Silver FL04/TG01/TS1/BS1
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Blue Silk SS1011
G) Inside Base Pad: Blue Velvet VT1110
H) Printed Logo Inside Lid: none
X01 Single Ring Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 50 x 36 x 34
Ring Case – Insert soft roll, foam padded, covered fabric, fixed in base
This jewel box is shown with the following options:
A) Outside Cover Material: Red Faux Suede FE1608
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Beige Faux Suede FE1609
G) Inside Base Pad: Beige Faux Suede FE1609
H) Printed Logo Inside Lid: Gold FL02
X02 Stud Flap Earring Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 50 x 36 x 34
Earring Case with Lift out pad, covered fabric
This jewel box is shown with the following options:
A) Outside Cover Material: Green Faux Suede FE1626
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Biscuit Faux Suede FE1610
G) Inside Base Pad: Biscuit Faux Suede FE1610
H) Printed Logo Inside Lid: Gold FL02
X03 Pendant Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 64 x 84 x 30
Pendant Case with lift out Insert, foam padded, covered fabric, base have bearer with two slit to take chain
This jewel box is shown with the following options:
A) Outside Cover Material: Silver Leatherlux LX401
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Cream Moccasin MN1806
G) Inside Base Pad: Cream Moccasin MN1806
H) Printed Logo Inside Lid: Gold FL02
X04 Wedge Earring Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 64 x 84 x 30
Earring Case with Lift out pad, covered fabric, with ribbon lift, portrait
This jewel box is shown with the following options:
A) Outside Cover Material: Matt Black Leatherlux LX407
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Grey Moccasin MN1803
G) Inside Base Pad: Grey Moccasin MN1803
H) Printed Logo Inside Lid: Gold FL02
X05 Wedge Earring Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 88 x 60 x 30
Earring Case with Lift out pad, covered fabric, with ribbon lift, Landscape
This jewel box is shown with the following options:
A) Outside Cover Material: Matt Black Leatherlux LX407
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Grey Moccasin MN1803
G) Inside Base Pad: Grey Moccasin MN1803
H) Printed Logo Inside Lid: Gold FL02
X06 Brooch Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 88 x 60 x 30
Brooch Case with Insert lift out, foam padded, with ribbon lift, landscape
This jewel box is shown with the following options:
A) Outside Cover Material: Matt Black Leatherlux LX407
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Grey Moccasin MN1803
G) Inside Base Pad: Grey Moccasin MN1803
H) Printed Logo Inside Lid: Gold FL02
X07 Bracelet Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 228 x 53 x 22
Bracelet Case – Insert with two tins, foam padded, covered fabric, fixed in base
This jewel box is shown with the following options:
A) Outside Cover Material: Matt Black Leatherlux LX407
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Grey Moccasin MN1803
G) Inside Base Pad: Grey Moccasin MN1803
H) Printed Logo Inside Lid: Gold FL02
X09 Bracelet Case with flat pad
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 228 x 53 x 22
Foam padded Bracelet Case, covered fabric, fixed in base
This jewel box is shown with the following options:
A) Outside Cover Material: Silver Leatherlux LX401
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Cream Moccasin MN1806
G) Inside Base Pad: Cream Moccasin MN1806
H) Printed Logo Inside Lid: Gold FL02
X10 Large Single Ring Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 60 x 45 x 52
Ring Case – Insert soft roll, foam padded, covered fabric, fixed in base
This jewel box is shown with the following options:
A) Outside Cover Material: Red Faux Suede FE1608
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Beige Faux Suede FE1609
G) Inside Base Pad: Beige Faux Suede FE1609
H) Printed Logo Inside Lid: Gold FL02
X11 Large Necklace Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 168 x 215 x 43
Necklace Case: Inner base lift out pad raised neck & two adjustable straps, covered fabric with ribbon lift , portrait
This jewel box is shown with the following options:
A) Outside Cover Material: Red Faux Suede FE1608
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Beige Faux Suede FE1609
G) Inside Base Pad: Beige Faux Suede FE1609
H) Printed Logo Inside Lid: Gold FL02
X12 Double Ring Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 88 x 60 x 30
Ring Case: Insert foam padded, covered fabric, fixed in base, landscape
This jewel box is shown with the following options:
A) Outside Cover Material: Silver Leatherlux LX401
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Cream Moccasin MN1806
G) Inside Base Pad: Cream Moccasin MN1806
H) Printed Logo Inside Lid: Gold FL02
X13 Flap Earring Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 88 x 60 x 30
Earring Case ~ Lift out pad with two holes, covered fabric, landscape
This jewel box is shown with the following options:
A) Outside Cover Material: Matt Black Leatherlux LX407
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Grey Moccasin MN1803
G) Inside Base Pad: Grey Moccasin MN1803
H) Printed Logo Inside Lid: Gold FL02
X14 Single Ring Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 50 x 36 x 36
Ring Case: Insert fixed in base with tin to hold ring, foam padded, covered fabric
This jewel box is shown with the following options:
A) Outside Cover Material: Green Faux Suede FE1626
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Biscuit Faux Suede FE1610
G) Inside Base Pad: Biscuit Faux Suede FE1610
H) Printed Logo Inside Lid: Gold FL02
X15 Large Necklace Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 168 x 215 x 43
:Necklace Case: Inner base lift out pad raised neck, covered fabric with ribbon lift, portrait
This jewel box is shown with the following options:
A) Outside Cover Material: Red Faux Suede FE1608
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Beige Faux Suede FE1609
G) Inside Base Pad: Beige Faux Suede FE1609
H) Printed Logo Inside Lid: Gold FL02
X16 Large Necklace Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 218 x 163 x 43
Necklace Case – Inner base lift out pad raised neck, covered fabric, with ribbon lift, landscape
This jewel box is shown with the following options:
A) Outside Cover Material: Green Faux Suede FE1626
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Biscuit Faux Suede FE1610
G) Inside Base Pad: Biscuit Faux Suede FE1610
H) Printed Logo Inside Lid: Gold FL02
X17 Deep Bangle Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 134 x 93 x 64
Bangle Case with Cushion lift out, covered fabric, landscape
This jewel box is shown with the following options:
A) Outside Cover Material: Matt Black Leatherlux LX407
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Grey Moccasin MN1803
G) Inside Base Pad: Grey Moccasin MN1803
H) Printed Logo Inside Lid: Gold FL02
X18 Bracelet Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 228 x 53 x 22
Bracelet Case: Insert with two elastic bands, foam padded, covered fabric, fixed in base
This jewel box is shown with the following options:
A) Outside Cover Material: Silver Leatherlux LX401
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Cream Moccasin MN1806
G) Inside Base Pad: Cream Moccasin MN1806
H) Printed Logo Inside Lid: Gold FL02
X19 Earring Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 64 x 84 x 30
Earring Case with bar flap, insert lift out, covered fabric two holes in flap
This jewel box is shown with the following options:
A) Outside Cover Material: Matt Black Leatherlux LX407
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Grey Moccasin MN1803
G) Inside Base Pad: Grey Moccasin MN1803
H) Printed Logo Inside Lid: Gold FL02
X20 Watch Bracelet Case
Part of the Prague Collection, Classic Design:
Internal Dimension (in mm): 134 x 93 x 64
Watch Bracelet Case: Insert band to hold to hold bracelet, covered fabric, fixed in base
This jewel box is shown with the following options:
A) Outside Cover Material: Silver Leatherlux LX401
B/C/D) Tooling: none
E) Front button fastener type: none
F) Inside lid top pad, joint & fillet base: Cream Moccasin MN1806
G) Inside Base Pad: Cream Moccasin MN1806
H) Printed Logo Inside Lid: Gold FL02
