Bracelet Display

Showing 1–20 of 40 results

AMB006 Hanging bracelet display for 8 bracelets

AMB006 Hanging Bracelet Display Pad for 8 Bracelets

Part of the Amber Jewelry Display Set:
Width x Height x Thickness (in mm): 205 x 205 x 40

Hanging bracelet display pad for 8 bracelets; two rows of hooks, one each side of the pad to attach the bracelet for display. To be used with the Amber vertical rods and railings set – see AMB000.

This product is shown with the following options:
-> Top Cover Material: White Ultra Suede UE512
-> Base / Border Cover Material: Red Ultra Suede UE510
-> Backside Material: Black Duratex DX1701
-> Fastener at Back: Metal finger
-> Fastener at Front: Brass hooks

CER141 Curved Bracelet Display

CER141 Curved Bracelet Display

Part of the Amethyst Display Collection, Jewellery Display:
External Dimension (in mm): 215 x 35 x 35
Curved bracelet display, slope with elastic loop at back to hold bracelet in place

This product is shown with the following customization options:
-> Outside Cover Material: White Leatherlux LX425
-> Underside Cover Material: White Skiverlite SE221

CER152 Small Single Bangle Display

CER152 Small Single Bangle Display

Part of the Amethyst Display Collection, Jewellery Display:
External Dimension (in mm): 83 x 32 x 30
Small single bangle display block with soft roll slot insert to hold bangle in position

This product is shown with the following customization options:
-> Outside Cover Material: White Leatherlux LX425
-> Underside Cover Material: White Skiverlite SE221

CIT008 Small Bangle or Bracelet Display

CIT008 Small Bangle or Bracelet Display

Part of the Citrine Display Collection, Jewellery Display:
External Dimension (in mm): 95 x 70 x 40
Small bangle or bracelet display; bracelet fits around metal clip covered with fabric,  the clip can be angled forward if required

This product is shown with the following options:
-> Outside Cover Material: Sage Green Faux Suede FE1637
-> Underside (Base) Material: Green Skiverlite SE225

CIT009 Single Bangle Stand

CIT009 Single Bangle Stand

Part of the Citrine Display Collection, Jewellery Display:
External Dimension (in mm): 110 x 52 x 30
Single bangle stand to hold wide bangle bracelet upright on display

This product is shown with the following options:
-> Outside Cover Material: Sage Green Faux Suede FE1637
-> Underside (Base) Material: Green Skiverlite SE225

CIT010 Single Bangle Stand

CIT010 Single Bangle Stand

Part of the Citrine Display Collection, Jewellery Display:
External Dimension (in mm): 110 x 33 x 30
Single bangle stand to hold medium wide bangle bracelet upright on display

This product is shown with the following options:
-> Outside Cover Material: Sage Green Faux Suede FE1637
-> Underside (Base) Material: Green Skiverlite SE225

CIT011 Single Bangle Stand

CIT011 Single Bangle Stand

Part of the Citrine Display Collection, Jewellery Display:
External Dimension (in mm): 110 x 25 x 30
Single bangle stand to hold narrow bangle bracelet upright on display

This product is shown with the following options:
-> Outside Cover Material: Sage Green Faux Suede FE1637
-> Underside (Base) Material: Green Skiverlite SE225

CIT022 Curved Bracelet Display Block

CIT022 Curved Bracelet Display Block

Part of the Citrine Display Collection, Jewellery Display:
External Dimension (in mm): 148 x 30 x 90
Curved bracelet display for use in both counter or window display

This product is shown with the following options:
-> Outside Cover Material: Sage Green Faux Suede FE1637

COR050 Curved Bracelet Display

COR050 Curved Bracelet Display

Part of the Coral Display Collection, Jewelry Display:
External Dimension (in mm): 232 x 37 x 52

Curved bracelet display to hold single bracelet, the display top pad has two elastic loops one at each end of the display to hold the bracelet in position, a stitched edge line can be added to the top pad if requested

This product is shown with the following options:
-> Outside Cover Material: Purple Faux Suede FE1612
-> Underside (Base) Material: Purple Skivertex® SX115
-> Fastener Type: Black Elastic on both ends

COR060 Bracelet Display Block

COR060 Bracelet Display Block

Part of the Coral Display Collection, Jewelry Display:
External Dimension (in mm): 90 x 90 x 85

Single bracelet display, the bracelet fits around a covered metal band which is mounted on a base display block with outer curved sides to give a distinctive finish, a stitched edge line can be added to the top of the base block if requested

This product is shown with the following options:
-> Outside Cover Material: Purple Faux Suede FE1612
-> Underside (Base) Material: Purple Skivertex® SX115

COR070 Bracelet Display Stand

COR070 Bracelet Display Stand

Part of the Coral Display Collection, Jewelry Display:
External Dimension (in mm): 70 x 70 x 170

Single bracelet display. The bracelet fits around a covered metal band which is mounted on a base display block with outer curved sides to give a distinctive finish, a stitched edge line can be added to the top of the base block if requested

This product is shown with the following options:
-> Outside Cover Material: Grey Faux Suede FE1604
-> Underside (Base) Material: Grey Skivertex® SX161

DIA020 Bracelet Display Wedge (232 x 50 x 22/10 mm)

DIA020 Bracelet Display, Wedge

Part of the Diamond Display Collection:
External Dimension (in mm): 232 x 50 x 22

Large wedge bracelet display, octagonal finish with step to hold in place the fine piece of jewellery shown.

This product is shown with the following options:
-> Outside Cover Material: Grey Faux Suede FE1604
-> Underside (Base) Material: Grey Skivertex® SX161

DIA021 Bracelet Display Wedge (232 x 35 x 22/10 mm)

DIA021 Bracelet Display, Wedge

Part of the Diamond Display Collection:
External Dimension (in mm): 232 x 35 x 22
Sloping (in mm): 10

Medium wedge bracelet display, octagonal finish with step to hold in place the fine piece of jewellery shown.

This product is shown with the following options:
-> Outside Cover Material: Blue Moccasin MN1801
-> Underside (Base) Material: Blue Skiverlite SE206

DIA022 Bracelet Display Wedge (232 x 25 x 12/5 mm)

DIA022 Bracelet Display, Wedge

Part of the Diamond Display Collection:
External Dimension (in mm): 232 x 25 x 12
Sloping (in mm): 5

Narrow Bracelet Display wedge, octagonal finish with step to hold in place the fine piece of jewellery shown.

This product is shown with the following options:
-> Outside Cover Material: Grey Faux Suede FE1604
-> Underside (Base) Material: Grey Skivertex® SX161

EME020 Bracelet Display

EME020 Bracelet Display Stand

Part of the Emerald Jewellery Display Collection:
Width x Height Dimension (in mm): 75 x 172
Front to Back (in mm): 120

Bracelet display with adjustable elastic loop to hold bracelet in place; exterior cover material and colour can be selected from several available swatches

This product is shown with the following options:
-> Exterieur Cover Material: Green Faux Suede FE1626
-> Base Material: Green Skivertex® SX132
-> Fastener Type: White Elastic

EME021 Narrow Bracelet Display

EME021 Narrow Bracelet Display Stand

Part of the Emerald Jewelry Displays Collection:
Width x Height Dimension (in mm): 40 x 172
Front to Back (in mm): 120

Narrow bracelet display with adjustable elastic loop to hold bracelet in place; exterior cover material and colour can be selected from several available swatches

This product is shown with the following options:
-> Exterieur Cover Material: Green Faux Suede FE1626
-> Base Material: Green Skivertex® SX132
-> Fastener Type: White Elastic

JAD020 Bangle Bracelet Display Block

JAD020 Bangle Bracelet Display Block

Part of the Jade Jewelry Display Collection:
External Dimension (in mm): 100 x 100 x 25
Bangle bracelet display stand; the bangle bracelet is held on display on a fabric covered metal band

This product is shown with the following options:
-> Outside Cover Material: Light Grey Ultra Suede UE503
-> Underside Cover Material: Light Grey Weavex WX1505

JAD073 Eight Hoop Bangle Display

JAD073 Eight Hoop Bangle Display

Part of the Jade Jewelry Display Collection:
External Dimension (in mm): 148 x 96 x 48
Sloping Height (in mm): 20
Wedge style bangle display to hold eight hoop bangles, each fitting in soft roll slits to hold products on display

This product is shown with the following options:
-> Outside Cover Material: Brown Ultra Suede UE504
-> Underside Cover Material: Brown Skivertex® SX104

JAD080 Bracelet Display

JAD080 Bracelet Display

Part of the Jade Jewelry Display Collection:
External Dimension (in mm): 220 x 45 x 16
Sloping Height (in mm): 8
Angled bracelet display with front ledge to rest bracelet against

This product is shown with the following options:
-> Outside Cover Material: Light Grey Ultra Suede UE503
-> Underside Cover Material: Light Grey Weavex WX1505

MOR016 Jewelry Cushion Display Bracelet or Bangle

MOR016 Jewelry Cushion Display for Bangle or Bracelet

Part of the Morganite Jewelry Display Collection:
Cushion Size (in mm): 90 x 90 x 45
Foot (in mm): 110 x 85 x 10

Fits on Top of Column: MOR007, MOR008, MOR009, MOR010

Jewelry Cushion Display for Bracelet or Bangle.

This product is shown with the following options:
-> Outside Cover Material: Saffron Yellow Faux Suede FE1611
-> Underside (Base) Material: Yellow Skiverlite SE223