SAP020 Curved Bracelet Display Prop
Part of the Sapphire Jewellery Display Collection:
External Dimension (L x W x H in mm): 212 x 24 x 30
Curved bracelet display prop for use in both counter or window jewelry presentation.
This product is shown with the following options:
-> Outside Cover Material: Saffron Yellow Moccasin MN1812
-> Underside (Base) Material: Yellow Skivertex® SX181
SAP021 Curved Bracelet Display Prop
Part of the Sapphire Jewellery Display Collection:
External Dimension (L x W x H in mm): 212 x 44 x 30
Curved bracelet display prop for use in both counter or window jewelry presentation.
This product is shown with the following options:
-> Outside Cover Material: Saffron Yellow Moccasin MN1812
-> Underside (Base) Material: Yellow Skivertex® SX181
SAP022 Curved Bracelet Display Prop
Part of the Sapphire Jewellery Display Collection:
External Dimension (L x W x H in mm): 212 x 55 x 30
Curved bracelet display prop for use in both counter or window jewelry presentation.
This product is shown with the following options:
-> Outside Cover Material: Saffron Yellow Moccasin MN1812
-> Underside (Base) Material: Yellow Skivertex® SX181
SAP023 Curved Bracelet Display Prop
Part of the Sapphire Jewellery Display Collection:
External Dimension (L x W x H in mm): 212 x 45 x 50
Curved bracelet display prop for use in both counter or window jewelry presentation.
This product is shown with the following options:
-> Outside Cover Material: Saffron Yellow Moccasin MN1812
-> Underside (Base) Material: Yellow Skivertex® SX181
SAP024 Curved Bracelet Display Prop
Part of the Sapphire Jewellery Display Collection:
External Dimension (L x W x H in mm): 212 x 150 x 30
Curved bracelet display prop for use in both counter or window jewelry presentation.
This product is shown with the following options:
-> Outside Cover Material: Saffron Yellow Moccasin MN1812
-> Underside (Base) Material: Yellow Skivertex® SX181
SAP025 Curved Bracelet Display Prop
Part of the Sapphire Jewellery Display Collection:
External Dimension (L x W x H in mm): 212 x 100 x 30
Curved bracelet display prop for use in both counter or window jewelry presentation.
This product is shown with the following options:
-> Outside Cover Material: Saffron Yellow Moccasin MN1812
-> Underside (Base) Material: Yellow Skivertex® SX181
SQU015 Four Pads Bracelet Wedge Display
Part of the Opal Jewellery Display Collection:
External Dimension (in mm): 237 x 136 x 50, with sloping of 20 mm
Four pads bracelet wedge display to hold four flat bracelets; each bracelet pad is lift-out with elastic loops to hold bracelet in place
This bracelet wedge display is shown with the following options:
-> Outside Cover Material: Cream Faux Suede FE1607
-> Base Cover Material: Cream Skiverlite SE201
-> Fastener Type: Cream coloured elastic band
SQU023 Bracelet Bangle Display
Part of the Opal Jewellery Display Collection:
External Dimension (in mm): 150 x 150 x 50, with sloping of 25 mm
Bracelet Bangle Display, wedge shape, to hold multiple slim bracelet bangles in a row
This bracelet bangle display is shown with the following options:
-> Outside Cover Material: Pink Faux Suede FE1627
-> Base Cover Material: Pink Skiverlite SE213
SQU025 Bracelet Cushion Display
Part of the Opal Jewellery Display Collection:
External Dimension (in mm): 150 x 150 x 50, with sloping of 25 mm
Bracelet Cushion Display: Wedge display with lift-out soft cushion to hold soft or rigid bracelet
This bracelet cushion display is shown with the following options:
-> Outside Cover Material: Pink Faux Suede FE1629
-> Base Cover Material: Pink Skiverlite SE213
TOP008 Tree Bracelet Display
Part of the Topaz Display Collection:
External Dimension (in mm): 60 x 205 x 145
Bangle and bracelet display stand covered with fabric
This product is shown with the following options:
-> Outside Cover Material: Silver Leatherlux LX401
-> Underside Material: Cream Skiverlite SE201
TOP020 Curved Bracelet Display
Part of the Topaz Jewellery Display Collection:
External Dimension (in mm): 120 x 30 x 70
High curve bracelet display; sides of display in lacquer finish with fabric in center to present the jewellery at its best
This product is shown with the following options:
-> Outside Center Cover Material: Silver Leatherlux LX401
-> Block Sides: Hardwood, Silver Lacquer
-> Fastener Type: Magnet on Base
TOP021 Curved Column Bracelet Display
Part of the Topaz Jewellery Display Collection:
External Dimension (in mm): 120 x 55 x 130
Curve front column bracelet display to display multiple or single wide piece bracelets, sides of the display lacquer finish with fabric to center to present the jewellery at its best velcro grid strap to rear of display to secure the piece in position whilst on display
This product is shown with the following options:
-> Outside Center Cover Material: Silver Leatherlux LX401
-> Column Sides: Hardwood, Silver Lacquer
-> Fastener Type: Velcro for Back, Magnet on Base
ZIR034 Roll Display Stand for Bracelet or Bangle
Part of the Zircon Jewellery Display Collection:
External Dimension (in mm): 55 x 55 x 45
Foot (in mm): 66 x 66 x 10
Display Stand stand to hold bracelet or bangle which is wrapped around a cushion roll.
Fits on Top of Raiser Block: ZIR005, ZIR006, ZIR007, ZIR008
This product is shown with the following options:
-> Cover Material: Yellow Faux Suede FE1611
-> Underside Material: Yellow Skiverlite SE223
ZIR035 Large Bracelet Bangle Display (Roll)
Part of the Zircon Jewellery Display Collection:
External Dimension (in mm): 85 x 55 x 43
Foot (in mm): 91 x 91 x 10
Bracelet Bangle Display stand to hold a large bracelet or bangle secured by wrapping around the cushion roll.
Fits on Top of Raiser Block: ZIR009, ZIR010, ZIR011
This product is shown with the following options:
-> Cover Material: Grey Faux Suede FE1604
-> Underside Material: Grey Skivertex® SX161
ZIR036 Jewellery Cushion Display for Bracelet or Bangle
Part of the Zircon Jewellery Display Collection:
Cushion Dimension (in mm): 95 x 95 x 55
Foot (in mm): 66 x 66 x 10
Jewellery Cushion Display stand to hold bracelet or bangle on an angled soft pillow that is detachable from the support stand.
Fits on Top of Raiser Block: ZIR005, ZIR006, ZIR007, ZIR008
This product is shown with the following options:
-> Cover Material: Yellow Faux Suede FE1611
-> Underside Material: Yellow Skiverlite SE223
ZIR037 Large Jewellery Cushion for Bracelet or Bangle
Part of the Zircon Jewellery Display Collection:
Cushion Dimension (in mm): 95 x 95 x 55
Foot (in mm): 91 x 91 x 10
Jewellery Cushion Display stand to hold a large bracelet or bangle on an angled soft pillow that is detachable from the support stand.
Fits on Top of Raiser Block: ZIR009, ZIR010, ZIR011
This product is shown with the following options:
-> Cover Material: Pink Faux Suede FE1629
-> Underside Material: Pink Skiverlite SE213
DRW011 Bracelet / Watch (5) Drawer Insert
Part of the Imperial Storage Collection:
External Dimension (in mm): 285 x 328 x 25
Lift Out Pad Size (in mm): 284 x 60
Related Drawer Cabinets: ASH129 and CAB006
Insert display pad to fit inside drawer base; the insert is designed to hold five watches with flat strap or wide bracelets; products are held in place by two fabric covered elastic straps
This product is shown with the following options:
-> Exterior Cover Material: Green Faux Suede FE1626
-> Underside (Base) Material: Black Skiverlite SE230
DRW012 Bracelet / Watch (6) Drawer Insert
Part of the Imperial Storage Collection:
External Dimension (in mm): 285 x 328 x 25
Lift Out Pad Size (in mm): 284 x 48
Related Drawer Cabinets: ASH129 and CAB006
Insert display pad to fit inside drawer base; the insert is designed to hold six watches with flat strap or wide bracelets; products are held in place with one elastic strap and one metal clip, both covered with fabric
This product is shown with the following options:
-> Exterior Cover Material: Orange Faux Suede FE1632
-> Underside (Base) Material: Black Skiverlite SE230
DRW014 Bracelet / Watch (7) Drawer Insert
Part of the Imperial Storage Collection:
External Dimension (in mm): 285 x 328 x 25
Lift Out Pad Size (in mm): 284 x 42
Related Drawer Cabinets: ASH129 and CAB006
Insert display pad to fit inside drawer base; the insert is designed to hold seven watches with flat strap or wide bracelets; products are held in place with one elastic strap and one metal clip, both covered with fabric
This product is shown with the following options:
-> Exterior Cover Material: Yellow Faux Suede FE1635
-> Underside (Base) Material: Black Skiverlite SE230
DRW019 Necklace or Bracelet Drawer Insert
Part of the Imperial Storage Collection:
External Dimension (in mm): 285 x 328 x 25
Lift Out Pad Size (in mm): 65 x 73
Related Drawer Cabinets: ASH129 and CAB006Chain
Insert display pad to fit inside drawer base; the insert is designed to hold sixteen necklace or bracelet fobs; products are held in place on hook.
This product is shown with the following options:
-> Exterior Cover Material: Green Faux Suede FE1626
-> Underside (Base) Material: Black Skiverlite SE230
-> Fastener Type: Brass Hook
