HIPC Products

Catalogue

Showing 1021–1040 of 1266 results

RUB102 Earrings Display Tree

RUB102 Earrings Display Tree

Part of the Ruby Jewellery Display Collection:
External Dimension (in mm): 70 x 145 (Width x Height)
Foot (in mm): 42 x 42 x 60
Tree earrings display,  medium base block with 70mm stainless steel center post, top bar with holes to take earring wire or hook

This product is shown with the following options:
-> Outside Cover Material: Yellow Faux Suede FE1611
-> Underside (Base) Material: Beige Skivertex® SX181

RUB103 Earrings Display Tree

RUB103 Earrings Display Tree

Part of the Ruby Jewellery Display Collection:
External Dimension (in mm): 70 x 175 (Width x Height)
Foot (in mm): 42 x 42 x 60
Tree earrings display,  medium base block with 100mm stainless steel center post, top bar with holes to take earring wire or hook

This product is shown with the following options:
-> Outside Cover Material: Pink Faux Suede FE1629
-> Underside (Base) Material: Pink Skiverlite SE213

RUB111 Three Sets Earring Display

RUB111 Three Sets Earring Display

Part of the Ruby Jewellery Display Collection:
External Dimension (in mm): 52 x 52 x 70
Three sets of earrings display stand with holes to take earring wires to hold 3 pairs of earrings in place, padded front to give soft feel

This product is shown with the following options:
-> Outside Cover Material: Yellow Faux Suede FE1611

RUB112 Four Sets Earring Display

RUB112 Four Sets Earring Display

Part of the Ruby Jewellery Display Collection:
External Dimension (in mm): 60 x 60 x 80
Four sets of earrings display stand with holes to take earring wires to hold 4 pairs of earrings in place, padded front to give soft feel

This product is shown with the following options:
-> Outside Cover Material: Yellow Faux Suede FE1611

RUB113 One Pair of Earrings Display

RUB113 One Pair of Earrings Display

Part of the Ruby Jewellery Display Collection:
External Dimension (in mm): 60 x 60 x 80
One Pair of Earrings Display stand with holes to take earring wires to hold one pair of earrings in place, padded front to give soft feel

This product is shown with the following options:
-> Outside Cover Material: Yellow Faux Suede FE1611

SA001 Large Counter Jewellery Tray

SA001 Large Counter Jewellery Tray

Part of the Sovereign Collection, Jewelry Display:
Outside Tray Dimension (in mm): 335 x 252 x 25
Inner Pad Size (in mm): 312 x 192

Large counter Jewellery tray. The tray has a fixed soft ring bar and a flat padded removable pad; the lift out pad is double faced allowing you to have one colour fabric on the other side so as to help show off the jewellery at its best using the best colour for the piece presented; your logo can be printed on the lift out pad on both sides if required

This product is shown with the following options:
-> Outside Cover Material: Black Leatherlux LX407
-> Ring Bar and  Fillet Base Tray: Black Faux Suede FE1601
-> Reversible Lift Out Pad: Faux Suede – Yellow FE1611, Black FE1601
-> Underside Material: Black Skivertex® SX184

SA002 Medium Counter Jewellery Tray

SA002 Medium Counter Jewellery Tray

Part of the Sovereign Collection, Jewelry Display:
Outside Tray Dimension (in mm): 303 x 226 x 25
Inner Pad Size (in mm): 279 x 168

Medium counter Jewellery tray. The tray has a fixed soft ring bar and a flat padded removable pad; the lift out pad is double faced allowing you to have one colour fabric on the other side so as to help show off the jewellery at its best using the best colour for the piece presented; your logo can be printed on the lift out pad on both sides if required

This product is shown with the following options:
-> Outside Cover Material: Grey Faux Suede FE1637
-> Ring Bar and  Fillet Base Tray: Grey Faux Suede FE1637
-> Reversible Lift Out Pad: Faux Suede – Grey FE1637, Green FE1606
-> Underside Material: Light Green Skivertex® SX183

SA003 Small Counter Jewellery Tray

SA003 Small Counter Jewellery Tray

Part of the Sovereign Collection, Jewellery Display:
Outside Tray Dimension (in mm): 218 x 148 x 25
Inner Pad Size (in mm): 198 x 90

Small counter Jewellery tray. The tray has a fixed soft ring bar and a flat padded removable pad; the lift out pad is double faced allowing you to have one colour fabric on the other side so as to help show off the jewellery at its best using the best colour for the piece presented; your logo can be printed on the lift out pad on both sides if required

This product is shown with the following options:
-> Outside Cover Material: Black Leatherlux LX407
-> Ring Bar and  Fillet Base Tray: Black Faux Suede FE1601
-> Reversible Lift Out Pad: Faux Suede – Light Grey FE1633, Black FE1601
-> Underside Material: Black Skivertex® SX184

SA004 Medium Counter Jewellery Tray

SA004 Medium Counter Jewellery Tray

Part of the Sovereign Collection, Jewellery Display:
Outside Tray Dimension (in mm): 250 x 172 x 25
Inner Pad Size (in mm): 228 x 113

Medium counter Jewellery tray. The tray has a fixed soft ring bar and a flat padded removable pad; the lift out pad is double faced allowing you to have one colour fabric on the other side so as to help show off the jewellery at its best using the best colour for the piece presented; your logo can be printed on the lift out pad on both sides if required

This product is shown with the following options:
-> Outside Cover Material: Black Faux Suede FE1601
-> Ring Bar and Fillet Base Tray: Black Faux Suede FE1601
-> Reversible Lift Out Pad: Faux Suede – Saffron FE1611, Black FE1601
-> Underside Material: Black Skivertex® SX184

SA005 Plain Counter Jewellery Tray

SA005 Plain Counter Jewellery Tray

Part of the Sovereign Collection, Jewellery Display:
Outside Tray Dimension (in mm): 335 x 252 x 25
Inner Pad Size (in mm): 312 x 228

Plain counter Jewellery tray with a padded inner base; the pad is fixed into bottom of tray; the inside base pad can be foil printed with your logo or name if required

This product is shown with the following options:
-> Outside Cover Material: Light Brown Faux Suede FE1617
-> Fillet Base Tray: Light Brown Faux Suede FE1617
-> Inner Pad: Yellow Faux Suede FE1635
-> Underside Material: Light Brown Skivertex® SX104

SA006 Large Counter Jewellery Tray

SA006 Large Counter Jewellery Tray

Part of the Sovereign Collection, Jewellery Display:
Outside Tray Dimension (in mm): 310 x 226 x 35
Inner Pad Size (in mm): 286 x 168

Large counter Jewellery tray. The tray has a fixed soft ring bar and a flat padded removable pad; the lift out pad is double faced allowing you to have one colour fabric on the other side so as to help show off the jewellery at its best using the best colour for the piece presented; your logo can be printed on the lift out pad on both sides if required

This product is shown with the following options:
-> Outside Cover Material: Black Leatherlux LX407
-> Ring Bar and Fillet Base Tray: Black Faux Suede FE1628
-> Reversible Lift Out Pad: Faux Suede – Cream FE1609, Black FE1628
-> Underside Material: Black Skivertex® SX184

SA007 Counter Serving Jewellery Tray

SA007 Counter Jewellery Tray

Part of the Sovereign Collection, Jewellery Display:
Outside Tray Dimension (in mm): 392 x 224 x 35
Inner Pad Size (in mm): 335 x 200

This counter Jewellery tray has the fixed soft ring bar set to the short end or side of the tray; the flat padded double sided lift out display pad is double faced allowing you to have one colour fabric one side and different colour on the other side so as to help display the jewellery being at its best; the tray has higher sides to prevent that the jewellery on display slips off; your logo can be printed on both sides of the lift out pad if required

This product is shown with the following options:
-> Outside Cover Material: Black Leatherlux LX407
-> Ring Bar and Fillet Base Tray: Black Faux Suede FE1628
-> Reversible Lift Out Pad: Faux Suede – Cream FE1609, Black FE1628
-> Underside Material: Black Skivertex® SX184

SA008 Jewellery Tray

SA008 Jewellery Tray

Part of the Sovereign Collection, Jewellery Display:
Outside Tray Dimension (in mm): 392 x 224 x 35
Inner Pad Size (in mm): 370 x 200

This counter Jewellery tray has a flat padded lift out display pad which is double faced allowing you to have one colour fabric one side and different colour on the other side so as to help display the jewellery being at its best; the tray has higher sides to prevent that the jewellery on display slips off; your logo can be printed on both sides of the lift out pad if required

This product is shown with the following options:
-> Outside Cover Material: Black Leatherlux LX407
-> Fillet Base Tray: Black Faux Suede FE1628
-> Reversible Lift Out Pad: Faux Suede – Cream FE1609, Black FE1628
-> Underside Material: Black Skivertex® SX184

SA009 Octagonal Jewellery Tray

SA009 Octogonal Jewellery Tray

Part of the Sovereign Collection, Jewellery Display:
Outside Tray Dimension (in mm): 330 x 225 x 25
Inner Pad Size (in mm): 305 x 195

Medium sized octagonal Jewellery tray complete with fixed ring bar section and lift out pad; the removable pad is padded both sides and can be covered in two different colours of fabric ; the lift out pad has two end tags to enable easy removal from the tray; your logo can be printed on the lift out pad on both sides if required

This product is shown with the following options:
-> Outside Cover Material: Black Real Leather RL645
-> Ring Bar and Fillet Base Tray: Black Faux Suede FE1601
-> Reversible Lift Out Pad: Faux Suede – Cream FE1607, Black FE1601
-> Underside Material: Black Skiverlite SE230

SA010 Jewellery Tray

SA010 Jewellery Tray

Part of the Sovereign Collection, Jewellery Display:
Outside Tray Dimension (in mm): 300 x 215 x 25
Inner Pad Size (in mm): 285 x 165

Jewellery tray with ring soft roll bar and fixed inside base pad to display jewellery; the tray has a wood veneer finished tray edge with a fabric ring bar and inside base pad;  your logo can be printed on the inside fixed base pad if required

This product is shown with the following options:
-> Outside Cover Material: Walnut Wood Veneer WV005
-> Ring Bar and Inner Pad: Brown Ultra Suede UE504
-> Underside (Base) Material: Walnut Wood Veneer WV005

SA011 Jewellery Tray

SA011 Jewellery Tray

Part of the Sovereign Collection, Jewellery Display:
Outside Tray Dimension (in mm): 300 x 230 x 15
Inner Pad Size (in mm): 280 x 210

Jewellery tray with inside fixed padded base pad to display your jewellery; your logo can be printed on the inside base pad if required

This product is shown with the following options:
-> Outside Cover Material: Pink Faux Suede FE1629
-> Inner Pad: Cream Faux Suede FE1607
-> Underside (Base) Material: Pink Faux Suede FE1629

SA012 Fold Up Book Style Counter Pad

SA012 Fold-Up Book Style Counter Pad

Part of the Sovereign Collection, Jewellery Display:
Open Dimension (in mm): 290 x 300
Closed Dimension (in mm): 145 x 300

Fold up book style counter pad; the exterior of this jewellery tray is covered in real leather or Duratex fabric; the interior is in real suede or soft fabric; your logo can be printed in the book or exterior of the folder if required

This product is shown with the following options:
-> Outside Cover Material: Blue Real Leather RL611
-> Inner Pad: Blue Faux Suede FE1615

SAP001 Single Ring Display

SAP001 Single Ring Display

Part of the Sapphire Jewelry Display Collection:
External Dimension (in mm): 45 x 45 x 25
Sloping: 17mm

Small single ring display stand with top soft-roll insert to hold ring in place; the top of the stand is angled forward to better show off the product

This product is shown with the following options:
-> Outside Cover Material: Saffron Yellow Moccasin MN1812
-> Underside (Base) Material: Yellow Skivertex® SX181

SAP002 Single Ring Display

SAP002 Single Ring Display

Part of the Sapphire Jewelry Display Collection:
External Dimension (in mm): 45 x 45 x 37
Sloping: 25mm

Small single ring display stand with top soft-roll insert to hold ring in place; the top of the stand is angled forward to better show off the product

This product is shown with the following options:
-> Outside Cover Material: Saffron Yellow Moccasin MN1812
-> Underside (Base) Material: Yellow Skivertex® SX181

SAP003 Single Ring Display

SAP003 Single Ring Display

Part of the Sapphire Jewelry Display Collection:
External Dimension (in mm): 45 x 45 x 50
Sloping: 40mm

Small single ring display stand with top soft-roll insert to hold ring in place; the top of the stand is angled forward to better show off the product

This product is shown with the following options:
-> Outside Cover Material: Saffron Yellow Moccasin MN1812
-> Underside (Base) Material: Yellow Skivertex® SX181